Skip to main content

HG000011 - PC

 

Deployment Layout:

+---------------+
|serial 0       |
|serial 1       |
|parallel 0     |
|parallel 1     |
|multi-serial-p0|
|multi-serial-p1|
|multi-serial-p2|
|multi-serial-p3|
|network 0      |
+---------------+

Motherboard: PAT48PG4-1.20









Configuration

CPU:

    AMD Am486DX2-66

Memory:

    Max: 128MB 

    Bank0
        Slot0: SIMM 30-pin
        Slot1: SIMM 30-pin
        Slot2: SIMM 30-pin
        Slot3: SIMM 30-pin
    Bank1:
        Slot0: SIMM 72-pin
    Bank2:
        Slot0: SIMM 72-pin

Connectors:

    None

Expansion slots:

    Slot1: ISA-16
        Multi I/O card (ISA-16)
            JP1: 40-pin IDE (Internal)
                0:
                1:
            JP9: 34-pin FDC (Internal)
                0:
                1:
            JP10: 16-pin Game Port (Internal)
            JP11: 10-pin RS-232 II (Internal to chassis) DB-25 Male
            JP12: RS-231 I (bracket) DB-9 Male
            JP13: Parallel (bracket) DB-25 Female
            JP3: closed (single IDE drive) [open (two IDE drives)]
            JP4: not present. Maybe open(?) [parallel port is bi-directional]
            JP6: Serial port set-up
                1,2: RS-232 I Address
                    LL:
                    LH:
                    HL:
                    HH:
                3,4: RS-232 II Address
                    LL:
                    LH:
                    HL:
                    HH:
                5,6: Parallel Address
            JP7: not present. I have to test the system.
    Slot2: ISA-16
    Slot3: ISA-16
    Slot4: ISA-16
        Audio card (ISA-16) + Game Port
    Slot5: ISA-16 / VL
        Video Card (ISA-16) + Game Port
    Slot6: ISA-16 / VL
    Slot7: ISA-16 /VL

Links:

Photos


Labels:

Comments

Post a Comment

Popular posts from this blog

Movies - The Bubble (2022)

  Back to Evolution (2001) .
Post a Comment
Read more

IT - Fixing Windows Error 1327: Account Restrictions Are Preventing This User from Signing In

Fixing Windows Error 1327: Account Restrictions Are Preventing This User from Signing In Introduction Error 1327, “Account restrictions are preventing this user from signing in,” is a perplexing and disruptive issue that occurs on some Windows 10 and Windows 11 machines. The message typically appears at login or while connecting to remote resources, like shared folders, network drives, or remote desktops. Table of Contents Symptoms of Error 1327 Common Causes Step-by-Step Troubleshooting Advanced Fixes Automation via PowerShell Prevention Tips Further Reading Symptoms of Error 1327 Users experiencing this error may encounter one or more of the following: Login screen fails after credentials are entered. Error message appears when accessing mapped drives or network resources. Remote Desktop Connection (RDP) is rejected with the 1327 message. Group Policy logon restrictions silently block access. Co...
Post a Comment
Read more

ATA Drive Capacity Limitations

ATA interface versions up through ATA-5 suffered from a drive capacity limitation of about 137GB (billion bytes). Depending on the BIOS used, you can further reduce this limitation to 8.4GB, or even as low as 528MB (million bytes). This is due to limitations in both the BIOS and the ATA interface, which when combined create even further limitations. To understand these limits, you have to look at the BIOS (software) and ATA (hardware) interfaces together. NOTE In addition to the BIOS/ATA limitations discussed in this section, various operating system limitations exist. These are described later in this chapter. The limitations when dealing with ATA drives are those of the ATA interface as well as the BIOS interface used to talk to the drive. A summary of the limitations is shown in Table 7.12. Table 7.12. ATA/IDE Capacity Limitations for Various Sector Addressing Methods Sector Addressing Method Total Sectors Calculation Maximum Total Sectors Maximum Capacity (Byte...
Post a Comment
Read more